86-718-8268306
No. 162, Jingui Avenue, Enshi, Hubei, China (Mainland)
custom induction air coil copper air core coils Specification:
Some model of our Standard custom induction air coil copper air core coils specification as following:
| Air Core Coil Specification From Transl Factory | |||||||
| NO. | Model | Inner Dia. (mm) | Outer Dia. (mm) | Height (mm) | Resistance (Ω) | Inductance | Wire Type |
| 1 | DGKY1104 | 11.00 | 15.00 | 3.50 | 1.85 | 37.50 μH | Enamelled Wire |
| 2 | DGKY0603 | 6.10 | 11.50 | 2.70 | 0.85 | 19.10 μH | Litz Wire |
| 3 | DGKY1205 | 11.80 | 14.20 | 5.00 | 1.50 | 43.30 μH | Litz Wire |
| 4 | DGKY4001 | 40.00 | 48.00 | 0.80 | 0.20 | 13.50 μH | Enamelled Wire |
| 5 | DGKY7307 | 72.80 | 75.80 | 7.20 | 0.70 | 158.90 μH | Enamelled Wire |
| 6 | DGKY3400 | 34.00 | 37.90 | 0.30 | 220.90 | 3.4 mH | Enamelled Wire |
| 7 | DGKY2803 | 28.00 | 29.50 | 3.00 | 13.20 | 450.10 μH | Enamelled Wire |
| 8 | DGKY1501 | 15.00 | 17.00 | 1.00 | 0.30 | 4.70 μH | Enamelled Wire |
| 9 | DGKY2414 | 24.00 | 29.60 | 14.00 | 18.60 | 8.20 mH | Enamelled Wire |
| 10 | DGKY2417 | 24.40 | 27.60 | 17.20 | 29.20 | 7.00 mH | Enamelled Wire |
| 11 | DGKY0416 | 4.30 | 5.30 | 15.60 | 10.50 | 223.30 μH | Enamelled Wire |
| 12 | DGKY0303 | 2.55 | 3.36 | 3.30 | 0.40 | 2.9 μH | Enamelled Wire |
| 13 | DGKY4213 | 42.00 | 13.20 | 2.00 | 30.80 | 2.2 mH | 6.6 mm |
| 14 | DGKY7949 | 79.00 | 48.50 | 2.00 | 72.40 | 7.1 mH | 1.0 mm |
| 15 | DGKY1606 | 16.00 | 5.50 | 0.90 | 36.20 | 218.1 μH | 2.8 mm |
Please send us your requirment of Inner Diameter, Outter Diameter, Height, Wire Diameter, Resistance value, we will quote you within 24 hours.
1.What are your main products?
Our main products are:
Push Pull Solenoid, Keeping Solenoid, Tubular Solenoid, Door Lock Solenoid;
Water Solenoid Valve, Pneumatic Solenoid Valve;
Charging Coil, Transformer Coil, Sensor Coil, Motor Coil, Voice Coil , Printer Head Coil.
Solenoid Coil for Automotive, Hydraulic , Pneumatic , Refrigeration application.
2.What are your main market?
USA, Canad, Germany, Russia, Spain, Australia, Korea, Singapore, Israel and so on.
Do you have mold /tooling development facility
Yes, we can develop plastic injection mold.
3.What is your sample policy?
We offer small quantity of free samples with standard stored products, clients are requested to pay the shipping charges; Non standard products will be charged based on actual situation.
4.What service your company can offer?
Products design, development, production, test as per requirement
Lead time: 5 -7 days for sample, 15-25 days for mass production.
Shipment: We have FedEx, DHL, UPS, DPEX Courier chain, can provide best solution.
Feedback: 24 Hours email feedback or online service.
5.What are the payment term?
T/T, Paypal, L/C, Alibaba online Trade/Trade Assurance.
